beautypg.com

Replacing the remote control battery, Docking an ipod with your speaker dock, Using your speaker dock – Insignia 09-0663 User Manual

Page 8: Playing your ipod on your speaker dock, Setting the clock

background image

5

Insignia NS-IPSD4 MP3 Speaker Dock

www.insigniaproducts.com

Replacing the remote control battery

To replace the remote control batteries:

1 Turn the remote control over.

2 Push the locking tab, then pull out the battery

tray.

3 Remove the old battery and dispose of it in an

approved manner.

4 Insert the new battery into the battery tray with

the positive (+) side up, then push the battery
tray into the remote control.

Docking an iPod with your speaker dock

To dock an iPod with your speaker dock:

1 Locate the numbered iPod bracket that fits your

iPod.

Each included bracket has a number on it,
indicating which iPod model the bracket is
compatible with. See the bracket chart in the
Appendix on page 6 to identify which bracket is
needed.

2 Snap the bracket into place over the iPod

connector in the speaker dock.

All brackets will only fit onto the dock one way.
When inserting an iPod nano (first or second
generation), slide the dock connection on the
unit so that it matches the opening on the iPod.

3 Connect the iPod to the iPod bracket on the

speaker dock.

After the iPod is connected to the speaker dock,
the unit will charge the iPod.

Using your speaker dock

Playing your iPod on your speaker dock

To play your iPod on your speaker dock:

1 Connect your iPod to the speaker dock (see

“Docking an iPod with your speaker dock” on
page 5
)

2 Press

POWER/

, to turn on the speaker

dock.

3 Press

POWER/

again to begin playing

your iPod.

4 Make the following adjustments, according to

your taste:

• Press VOLUME + or - to adjust the volume.
• Press EQ to cycle through the available sound

preset modes. Choices include ROCK,
CLASSIC, JAZZ, or POP.

• Press MUTE to mute the sound. Press again to

restore the sound to the previous setting.

5 You can also select the music you want to listen

to by doing the following:

• Press SKIP+/

or SKIP-/

to skip tracks

forward or back, or press and hold SKIP+/

or SKIP-/

to search through individual

tracks.

• Press CHAPTER, ALBUM, or PLAYLIST to

navigate through the chapters, albums, or
playlists on the docked iPod.

• Press MENU

or

MENU ,

then

SELECT to

navigate the iPod’s menu and make selections.

• Press SHUFFLE to turn on the shuffle option.
• Press REPEAT once to repeat the current track,

or twice to repeat the entire album or playlist.

6 To turn the speaker dock off, press

POWER/

.

Setting the clock

To set the clock:

1 Press and hold CLK SET until the display flashes.

2 Press SKIP+/

or SKIP-/

to select the 12

or 24 hour clock, then press CLK SET.

3 Press SKIP+/

or SKIP-/

to adjust the

hour, then press CLK SET.

4 Press SKIP+/

or SKIP-/

to adjust the

minute, then press CLK SET to exit.

Caution

There is a danger of explosion if the remote control
batteries are not installed correctly. Replace only with
the same or equivalent (CR2025) battery.

iPod

Docking bracket

MP3 speaker dock

NS-IPSD4_09-0663_MAN_ENG_V1.book Page 5 Friday, September 4, 2009 6:41 AM