Insignia NS-IPSD4 - Manual

Quick Setup Guide l NS-IPSD4 MP3 Speaker System with iPod Dock
Congratulations on your purchase of a high-quality
Insignia product. Your NS-IPSD4 represents the state
of the art in MP3 speaker docks and is designed for
reliable and trouble-free performance.
Package contents
• Speaker dock
• iPod docking brackets
• Remote control with battery
• User Guide
• Quick Setup Guide
Features
• Certifi ed iPod connector installed for iPod dock
• Recharge circuit for iPod/mini/nano/ photo/video
• Includes docking brackets to fi t iPod players
• Controls a connected iPod
• Digital volume control
• 3.5 mm type Aux-In jack for shuffl e and other
audio players
• 3.5 mm type Aux-Out jack
• See-through LCD display
• Built-in AC line cord
• Battery backup for clock (2 x AAA not included)
• Full-feature remote control
Top view
# Description
1 Power/play/pause button
2 Next/+ and Prev/- buttons
3 Volume +/- button
4 CLK Set button
5 EQ (equalizer) button
6 Docking station
Bottom view
# Description
7 Backup battery compartment
8 LCD display
9 AUX Out port
10 AUX In port
Setting up your speaker dock
To connect the power to your speaker dock:
• Plug the power cord into a 120 V/60 Hz AC wall
outlet.
To install the backup batteries:
1 Open the backup battery compartment on the
bottom of your speaker dock.
2 Insert two AAA batteries (not included), noting
the positive (+) and negative (-) markings in the
compartment.
3 Replace the battery compartment cover.
Setting the clock
1 Press and hold CLK SET until the display fl ashes.
2 Press NEXT/+
or PREV/- to select the
12 or 24 hour clock, then press CLK SET.
3 Press NEXT/+ or PREV/- to adjust the
hour, then press CLK SET.
4 Press NEXT/+ or PREV/- to adjust the
minute, then press CLK SET to exit.
Docking an iPod with your speaker dock
1 Locate the numbered iPod bracket that fi ts your
iPod.
2 Snap the bracket into place over the iPod
connector in the speaker dock.
3 Connect the iPod to the iPod bracket on the
speaker
dock.
After the iPod is connected to the speaker dock, the
unit will charge the iPod.
Using your speaker dock
To play your iPod on your speaker dock:
1 Connect your iPod to the speaker dock (see
“Docking an iPod with your speaker dock” in
your User Guide.)
2 Press POWER/ , to turn on the speaker dock.
3 Press POWER/ again to begin playing your
iPod.
4 Make the following adjustments, according to your
preference:
•
Press VOLUME + or - to adjust the volume.
• Press EQ to cycle through the available sound
preset modes. Choices include ROCK, CLASSIC,
JAZZ, or POP.
• Press MUTE to mute the sound. Press again to
restore the sound to the previous setting.
5 You can also select the music you want to listen to
by doing the following:
• Press NEXT/+ or PREV/- to skip tracks
forward or back, or press and hold NEXT/+ or
PREV/- to search through individual tracks.
• Press CHAPTER, ALBUM, or PLAYLIST to navigate
through the chapters, albums, or playlists on the
docked iPod.
• Press MENU or MENU , then SELECT to
navigate the iPod’s menu and make selections.
• Press SHUFFLE to turn on the shuffl e option.
• Press REPEAT once to repeat the current track, or
twice to repeat the entire album or playlist.
6 To turn the speaker dock off , press POWER/ .
For more information about using your speaker
system, including connecting it to a stereo system, see
your User Guide.
One-year limited warranty
See the User Guide or visit
www.insigniaproducts.com for details.
© 2009 Best Buy Enterprise Services, Inc. All rights reserved.
ENGLISH 09-0664