IBM 31P8128 - Manual (Page 60)

5. Select Use the following IP address. For the IP address type 192.168.1.1
and then type 255.255.255.0 for the Subnet mask.
6. Ensure the DNS address settings are blank.
7. Click OK and restart your computer.
Note: If your current IP and DNS settings are different than what you will set
them to in the instructions below, copy down the current settings so you
can replace them after the migration.
Windows 95
1. Click Start -> Settings -> Control Panel.
2. Double-click Network.
3. The Network window opens. On the Configuration tab in the Network
window a box will display the installed network components. Select
TCP/IP - Intel pro/100 S Desktop Adapter
if you installed the PCI Ethernet
adapter or TCP/IP - Xircom Ethernet Adapter 10/100 if you installed the
PC card Ethernet adapter.
1-52 IBM Data Migration Kit: User’s Guide