Invacare 1141448 - Manual (Page 2)

InTouch™ Stabilite/Stabilite OM Cushion 2 Part No 1141448
Introduction
InTouch Stabilite Cushion
The InTouch Stabilite cushion is designed to provide pelvic stability and leg positioning for patients
with postural asymmetry. The InTouch Stabilite cushion is available in two different contours to suit
the amount of positioning required by the user. The InTouch Stabilite comes standard with a ThinAir
bladder for managing shear under the pelvis.
InTouch Stabilite OM (Obliquity Management) Cushion
The InTouch Stabilite OM cushion is designed to provide positioning, stability and leg positioning for
users with either a level pelvis, or with a mild to moderate pelvic obliquity.
The InTouch Stabilite OM cushion has the added benefit of allowing the clinician or Rehab Technology
Supplier the ability to accommodate or correct a mild to moderate obliquity by relocating obliquity
inserts. Refer to Modifying the Cushion to Accommodate Obliquity on page 6.
The ThinAir bladder is available as an option for the InTouch Stabilite OM cushion. To order the
ThinAir bladder, contact customer service at 1‐800‐333‐6900.
Outer/Inner Covers
The outer cover is made from a water resistant fabric to protect the foam. The top is fabricated from a
stretch fabric. The bottom is fabricated from a heavyweight, non‐skid fabric.
A water resistant inner cover allows air circulation while providing additional protection for the foam.
Cushion Inspection and Cleaning
Regular cleaning and inspection of the outer and inner covers is recommended.
ƽ WARNING
DO NOT continue to use this product if any of the upholstery materials, foams, and/or plastics
are found to be deformed, breaking, worn, and/or compressed. Corrective maintenance can be
performed at or arranged through your equipment supplier.
Outer Cover
CAUTION
DO NOT use fabric softeners or bleach. DO NOT machine dry. Air dry only. DO NOT dry in sun.
Machine wash the outer cover in cold water on gentle cycle using a mild detergent.
Inner Cover
Hand clean the inner cover using a soft cloth, warm water and a mild soap solution. Rinse off and hang
dry.
Foam
Wipe the foam with a damp cloth. DO NOT submerge or soak.