Insignia NS-DPF8TR - Manual (Page 35)

35 www.insigniaproducts.com
2
Press / to select SLIDESHOW , then press
( ENTER/PLAY/PAUSE ) or .
3 Press / to select OFF . The picture will pause on the
clock/calendar screen.
Setting viewing options
You can change all of the viewing options in the Setup menu
using the buttons on the top of the frame or on the remote
control. You can display the Setup menu at any time by
pressing
MENU . Only the available setup options for the
mode you are in are displayed for each menu.
To set viewing options:
1 Press ( BACK ) until the Home screen opens.
2 Press the arrow keys to highlight the SETUP icon, then
press ENTER . The Setup menu opens.
3 Press / to highlight a display option, then press
ENTER to select the option. A second menu opens,
listing the available settings.
4 Press ENTER again to open a third menu, if applicable.
A square icon ( ) to the right of an option shows the
current setting.
5
Press / to highlight a setting, then press ENTER to
select the setting.
Home Home
NS-DPF8TR_09-0513_MAN_ENG_V1.fm Page 35 Monday, July 6, 2009 3:34 PM