IBM 9511-A - Manual (Page 23)

21
DEUTSCH
ENGLISH
FRAN
Ç
AIS
ESP
A
Ñ
OL
IT
ALIANO
JAP
A
NESE
COMPL & W
A
RR
Screen is blank
and power
indicator is
Flashing green
every 0.5
second
The monitor is
not receiving
a video signal
Š
Check that the signal
cable is firmly connected to
the computer.
Š
Check that no pins are
bent in the signal cable
connector.
Connecting
your Monitor
section on
page 5
Display mode
of the
computer is
outside the
range of the
monitor
Š
Reconfigure the
computer to use a
supported display mode.
Further
Information
section on
page 18
Screen is blank
and power
indicator is
flashing amber
every 0.5 or 1
second
The monitor is
in the Power
Management
Suspend or
Off state
Š
Press any key on the
keyboard or move the
mouse to restore
operation.
Š
Check the Power
Management software on
your computer.
Power
Management
section on
page 19
Image appears
to be smeared
There are
noises in the
video signal
Š
Select IMAGE LOCK
menu in the OSD. Then
select MANUAL to adjust
FINE/COARSE settings.
User
controls
section on
page 13
Image appears
to be
discolored The Color
setting may
be incorrect Š
Adjust the Color
settings.
User
controls
section on
page 13
A few dots are
missing,
discolored, or
inappropriately
lighted.
Š
The LCD contains over 2,300,000 thin-
film transistors (TFTs). A small number of
missing, discolored, or lighted dots may be
present on the screen, which is an intrinsic
characteristic of the TFT LCD technology
and is not an LCD defect.
Problem
Possible
Cause
Suggested Action Reference
For image problems, you
may want to run AUTO
Setup again before consulting
to this section. In most cases,
AUTO SETUP can fix the
problems. See Auto Setup on
page 8 for details.
T54A-E.book Page 21 Saturday, February 19, 2000 12:05 PM