Image 8.0 - Manual (Page 19)

19
50. Locate and open the parts bag labeled “SEAT
ASSEMBLY.”
Attach a Seat (13) to the brackets on the Butterfly
Seat Frame (14) using four 1/4” x 3/4” Bolts (49).
Repeat this step with the other Seat (not shown)
and the Press Seat Frame (not shown).
51. Press a 1 1/2” Square Inner Cap (35) into the end
of the Press Backrest Frame (44). Attach a
Backrest (12) to the Press Backrest Frame with four
1/4” x 3/4” Bolts (49).
Pull out the Adjustment Knob (5) on the Press
Upright (2) as far as it can go. Slide the Press
Backrest Frame (44) into the Press Upright and
snap the Adjustment Knob into a hole in the Press
Backrest Frame. Turn the Adjustment Knob clock-
wise until tight.
52. Press a 1 1/2” Square Inner Cap (35) into the end
of the Butterfly Backrest Frame (70). Attach the
other Backrest (12) to the Butterfly Backrest Frame
with four 1/4” x 3/4” Bolts (49).
Pull out the Adjustment Knob (5) on the Butterfly
Upright (1) as far as it can go. Slide the Butterfly
Backrest Frame (70) into the Butterfly Upright and
snap the Adjustment Knob into a hole in the
Butterfly Backrest Frame. Turn the Adjustment
Knob clockwise until tight.
53. See drawing A. Attach the Shroud (34) to the
Press Top Frame (9) with two #8 x 1/2” Screws
(45).
See drawing B. Attach the Shroud (34) to the
Press Base (6) with two #8 x 1/2” Screws (45).
53
50
51
52
2 49
49
12
44
13
34
45
6
45
34
12
9
B A
35
70
1
5
5
49
49
49
14
35
SEAT ASSEMBLY