Image 8.0 User Manual

Page 18

46. Remove the 3/8” Nylon Locknut (50) from the indi-

cated 3/8” x 5 1/2” Bolt (55).

Wrap the Leg Press Cable (75) around a 3 1/2”
Pulley (24). Secure the Pulley and a Cable Trap
(25) to the 3/8” x 5 1/2” Bolt (55) on the indicated
side of the Press Base (6) with the 3/8” Nylon
Locknut (50).

Be sure the Cable Trap is oriented

to hold the Cable in place.

Press a 2 1/2” Square Inner Cap (76) into the Press
Base (6).

48. Remove the indicated 3/8” Nylon Locknuts (50).

Wrap the Leg Press Cable (75) around a 3 1/2”
Pulley (24). Attach the Pulley and a Cable Trap (25)
to the 3/8” x 4 3/4” Bolt (60) on the indicated side of
the Press Seat Frame (7) with the first 3/8” Nylon
Locknut (50).

Wrap the Leg Press Cable (75) around another
3 1/2” Pulley (24). Attach the Pulley and a Cable
Trap (25) to the 3/8” x 4 3/4” Bolt (60) on the indi-
cated side of the Press Frame (8) with the other
3/8” Nylon Locknut (50).

Be sure the Cable Traps (25) are oriented to
hold the Leg Press Cable (75) in place.

47. Remove the 3/8” Nylon Jamnut (63) from the indi-

cated 3/8” x 4 3/4” Bolt (60).

Wrap the Leg Press Cable (75) around a 3 1/2”
Pulley (24) in the direction shown. Secure the
Pulley and a Cable Trap (25) to the 3/8” x 4 3/4”
Bolt (60) on the indicated side of the Press Leg
Lever (90) with the 3/8” Nylon Jamnut (63).

Be sure

the Cable Trap is oriented to hold the Cable in
place.

49. Remove the indicated 3/8” Nylon Locknut (50).

Attach the Leg Press Cable (75) to the 3/8” x 3 1/4”
Bolt (62) on the indicated side of the Press Upright
(2) with the 3/8” Nylon Locknut (50).