Inch frame front seat-to-floor height – Invacare F-6S User Manual
Page 37
37
W
H
E
E
L
S
Spacer
Spacer
17-INCH FRAME FRONT SEAT-TO-FLOOR HEIGHT
NOTE: The seat-to-floor heights are based on pneumatic tires and pneumatic tires with flat free inserts. If wheelchair
is equipped with urethane tires, subtract 1/2-inch from the measurements listed below. All heights are approximate
to +1/4-inch due to tire wear and air pressure.
* NOTE: Anti-tippers are available in two (2) sizes - “A” and “B”. Note the size shown in the chart below.
22
24
26
A
B
N/A
22
24
26
A
B
N/A
22
24
26
A
B
N/A
22
24
26
A
B
N/A
22
24
26
A
B
N/A
22
24
26
A
B
N/A
PROCEDURE 5
WHEELS
FRONT
CASTER
AXLE
REAR WHEEL SIZE
SEAT-TO-FLOOR
SIZE AND
TUBE
HEIGHT
POSITION
POSITION
ANTI-TIPPER SIZE* AND POSITION
16-INCHES
3-INCH
TOP
UPPER Two (2)
Mounting Holes
16-INCHES
5-INCH
TOP
UPPER Two (2)
Mounting Holes
17-INCHES
3-INCH
MIDDLE
LOWER Two (2)
Mounting Holes
17-INCHES
5-INCH
MIDDLE
LOWER Two (2)
Mounting Holes
17.5-INCHES
6-INCH
BOTTOM
LOWER Two (2) Mounting Holes
INVERTED CAMBER CLAMPS
18-INCHES
5-INCH
BOTTOM
LOWER Two (2) Mounting Holes
INVERTED CAMBER CLAMPS