Set mode, Set mode programming – Icom IC-M90 User Manual
Page 22
16
SET MODE
8
■ SET mode programming
SET mode is used to change the condition of 17 transceiver
functions: beep tone function, weather alert function, priority
scan function, scan resume timer, auto scan function, dual/tri-
watch function, monitor switch action, automatic backlighting,
LCD contrast selection, auto power save function, self check
function, battery voltage indicator, signal strength indicator,
squelch sensitivity, scrambler code, VOX gain and VOX
delay.
D SET mode operation
q Turn power OFF.
w While pushing [SQL•
MONI
], turn power ON to enter the
SET mode.
• “bp” (Beep tone function setting) appears.
e Push [SQL•
MONI
] or [SQL•
MONI
] and [Y]/[Z] to select the
desired item, if necessary.
r Push [Y]/[Z] to select the desired condition of the item.
t To exit the SET mode, push [16•
9
].
D SET MODE ITEMS The displays show the default settings, and the selected item is displayed in the dotted circle.
VOX delay
VOX gain
: Push
: Push
and
Starting item
Push
and
Scrambler code
Squelch sensitivity
Signal strength
meter
Battery voltage
Self check
Power save
LCD contrast
Backlighting
Dual/Tri-watch
Monitor switch
Auto scan
Scan resume timer
Priority scan
Weather alert
Beep tone