Invacare 400 - Manual (Page 45)

Charger and Controller
Item
Number Part Number Description Note
Quantity Per
Package Assembly
1125393 Kit, Controller Tray Assembly (Invacare 400
Scooter) 1 1 1 B,F
Cover, Connector 1 1 2
Screw, Phillips Pan Head (#6-32 x 1-1/8") 1 3 3
Controller (Invacare 400 Scooter) 1 1 4
Charger, Battery 3 Amp. (Invacare 400 Scooter &
LX3) 1 1 5
Tie Wrap (17-1/2" L) 1 2 6
Screw, Phillips Pan Head (#4-40 x 1/2") 1 3 7
Screw, Phillips Pan Head (#6-32 x 3/4") 1 4 8
Fastener, Hook with Adhesive Back (1" W x 1" L) 1 1 9
Nut, Keps (#6-32) 1 7 10
Nut, Hex Keps (#4-40) 1 4 11
NLA - Tray, Controller (Invacare 400 Scooter) 1 1 12
Tie Wrap (5-5/8" L) 1 6 13
1114176 Charger, Battery 3 Amp. (Invacare 400 Scooter &
LX3) 1 1 5 F
1095502 Package, Tie Wrap (11-1/2" L) 10 1 6
1119183 Controller (Invacare 300 Scooter) 1 1 14 E
1116914-NLA NLA - Charger, Battery 2 Amp. (Invacare 300
Scooter & SX3) 1 1 15 E
1095502 Package, Tie Wrap (11-1/2" L) 10 1 16
P0870X050 Nut, Keps (#6-32) 1 3 17
1039773 Screw, Phillips Pan Head (#6-32 x 1-1/8") 1 3 18
1125394 Kit, Controller Mounting Tray Hardware 1 1 19 D,F
Screw, Hex Head (1/4-20 x 1-3/4") 1 4
Locknut (1/4-20) 1 4
Washer (1/4 x 23/32 x 1/16") 1 8
1121086 Cord, AC Power, 115VAC, 3 Prong On-Board (6'
6-1/2" L) 1 1 A
1095503 Package, Tie Wrap (5-5/8" L) 10 1 A,C
See Chart Batteries 1 1 A
A - Not Shown.
B - Includes: Items 2-12 and Rear Wire Harness (found on "Rear Wiring Harness" page).
C - These Cable Ties bind the wires to each other.
D - Includes: (4) 1/4-20 x 1-5/8 Hex Head Cap Screws, (8) Washers, and (4) 1/4-20 Hex Lock Nuts.
E - Used on the Zoom 300.
F - Used on the Zoom 400. NOTE:
Battery
Equipment Number Description
44
To order call toll free 1-800-333-6900, or www.invacare.com
Form No. 03-023