ioSafe R4 - Manual (Page 14)

P/N: 900-10004-00 REV 02 USER GUIDE, IOSAFE R4 14
Network
Ethernet
The Ethernet tab allows you to specify network interface-specific settings.
In the Standard Setting box, you can specify the IP address, network mask, speed/duplex mode,
and MTU settings. In most networks where a DHCP server is enabled, you can simply specify the
“Use values from a DHCP server” option to automatically set the IP address and network mask.
If you assign a static IP address, be aware that the browser will lose connection to the ioSafe R4
device after the IP address has been changed. You can click Rescan in RAIDar to locate the device
and reconnect from there.