Getting started – Siemens Xelibri 5 User Manual

Page 4

Getting Started

right page (3)

of PACO e2, A31008-H9250-A45-2-7619 (25.09.2003, 19:47)

VAR Language: ENG; VAR issue date: 18-September-2003

Getting
Started

Fitting battery

Unclip your Xelibri’s case (1) and, pressing the arrow on

the battery cover, slide towards bottom of phone (2).
Engage the battery tabs in the slots (3), then swing into

place (4). Refit the battery cover and re-clip.

To remove battery, lift tab at the bottom.

Fitting SIM card

Your service provider supplies

your SIM card. If it’s credit

card size, snap out the smaller

portion and tidy any rough

edges.
Flip open the cover (5) at the

side of your Xelibri to reveal

SIM slot and charger socket.

Insert the SIM in the top slot, positioning the cut-off cor-

ner as shown. Press until it clicks into place.
The SIM is spring-loaded – to remove, press it in.

Charging

Insert the supplied

charger into an easily

accessible mains socket

of the correct rating

and, opening the SIM

cover, plug into the bot-

tom socket with the pins

face up.

While it charges, the battery indicator will animate – if it

doesn’t, then see What if...? on p 21. Allow 2-3 hours

for a full charge.
Be sure to unplug the charger from the mains when

you’re finished.

paco.book Seite 3 Donnerstag, 25. September 2003 7:48 19