Miele G 879 SCVI - Manual (Page 66)

10. Installing the toekick.
To prevent damaging the front
panel, and before installing the con-
tinuous and removable toekick,
measurements must be taken to en-
sure that the toekick will not inter-
fere with the complete opening of
the dishwasher door.
The toekick area of the dishwasher is nor-
mally covered with a toekick run match-
ing the kitchen furniture.
The panel overhang ( P ), and toekick
depth of recess ( R ), determine the maxi-
mum dishwasher toekick height ( H ).
If the panel contacts the toekick
while the dishwasher door is being
opened, the dishwasher toekick
must be cut shorter or recessed
deeper.
If ( H ) is equal to or less than the toekick
height of the adjoining cabinetry, no in-
terference will exist, provided
that ( R ) is
at least 19 mm (3/4").
Note:
If a decorative or flush mount toekick is
desired, and (
R ) is less than 19 mm
(3/4"), other modifications, such as
beveling the top rear edge of the toe-
kick, may be adequate.
If your kitchen does not have a toekick
run matching the kitchen furniture, the
toekick area can be covered with a sep-
erate toekick kit, available at extra cost.
Dishwasher installation
66