Siemens ST55 - Manual (Page 17)

Calling
16
ST55 en retail, A31008-H6850-A101-1-7619 (8. August 2003, 14:18)
©
Siem
ens AG 2001
, I
:\Mob
il\ST5
5\ST5
5_retail\en\_v
on_ok\ST55_p
hone.f
m
If the number is busy
If the called number is busy or
cannot be reached because of
network problems several options
are available (depending on the
service provider). An incoming call
or any other use of the phone
interrupts these functions.
Either
Auto redial
§Auto§ Press. The phone number
is automatically dialled ten
times at increasing
time intervals. End with:
A
End key.
Or
Reminder
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after 15
minutes.
Accept call
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
§Answer§ Press.
Or
B
Press.
If the phone number has been
transmitted by the network, it is
displayed. If the name is in contacts
the relevant name appears instead.
Reject call
§Reject§ Press. The call will be
diverted if this has been
set previously (p. 57).
Or
A
Press briefly.
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones!
Additional information
Missed calls.......................................p. 27
Accept call using any key ..................p. 53
Switch off ringtone.............................p. 50