Motorola D200 - Manual (Page 11)

9
English
Or simply lift the handset from the base (providing auto
answer is set to On, see page 12).
After a short delay the call timer will start timing the call.
Call Waiting
If you subscribe to Call Waiting and the call waiting tone
sounds during a call, press and hold
to switch between
callers.
Receiving internal calls
If you receive a call from another handset, the icon and the
internal caller's handset number will be displayed.
Redial
Your handset saves the last 10 numbers called into a redial list.
You can select and redial any number from the list at a later
time. Each handset has its own redial list.
Numbers stored in the redial list can be up to 32 digits long.
Redial any of the last 10 numbers called
1. In standby mode, press
to display the last number
called.
2. Press or to display any of the last 10 numbers called.
3. Press to dial the displayed number.
Store a redial number to the phonebook
1. In standby mode, press
to display the last number
called.
2. Press or to display the redial number you want.
3. Press , then select " ADD TO PB", and then press .
4. " NAME ?" is displayed.
Enter a name using the keypad and press .
For information on entering names, see page 10.
You can enter a name of up to 12 characters.
Press to delete an incorrect letter.
5. The number is displayed again, press .
6. Select distinctive ring if required. Press or to select a
ringer. Press .
You will hear a beep to confirm the entry is stored.
Deleting numbers from the redial list
1. In standby mode, press
to display the last number
called.
2. Press or to display any of the last 10 numbers called.
3. With the number you want displayed, press .
4. Press or to select " DELETE" to delete the number
selected or " DELETE ALL" to delete all numbers in the list. Press
.
5. " CONFIRM ?" appears. Press .
Mute
When on a call you can mute the handset microphone and
speak privately to someone in the same room, without your
caller hearing you.
1. During a call, press .
" CALL MUTED" is displayed while mute is on and your caller
cannot hear you.
2. To resume your call, press again.
Allegro_CID.book Page 9 Tuesday, January 15, 2008 3:07 PM