Master Appliance PH-1100 - Manual (Page 7)

7
All repairs and maintenance in
this instruction manual must
be performed by a qualified
repair technician who is expe-
rienced with the repair of elec-
tric tools, a qualified service
organization, or Master
Appliance Corp.’s Repair
Department.
For prompt and efficient main-
tenance and repair service,
return your product to:
Master Appliance Corp.
Attn: Repair Department
2420 - 18th Street
Racine, Wl 53403
Please enclose a note
describing your problem and
your phone number.
WARNING: Always unplug
your tool before performing
any maintenance or repairs.
Use only identical Master
Appliance brand replacement
parts.
Heating Elements
Heating element abuse and
eventual burnout can occur
from one of the following con-
ditions:
1) Inadequate blower speed
2) High line voltage
3) Improper attachment
4) Improper placement of ele-
ment or mica insulator
sheets.
5) Nozzle too close to work
being heated (less than 1”).
Lubrication
The bearings are lubricated at
the factory and require no fur-
ther lubrication.
Cleaning
Unplug heat gun before clean-
ing. To clean outside of tool,
use only a mild soap and
damp cloth. Do not use other
cleaning agents, turpentine,
gasoline, lacquer or paint thin-
ner, or other solvents that may
contain chemicals which are
harmful to plastics and other
insulating materials. Never
immerse tool in a liquid or
allow a liquid to enter inside
the tool. Make sure all vents
and openings are free and
clear of debris.
Maintenance Instructions