Changing the wake area sensitivity level – Metrologic Instruments MS2421 User Manual
Page 32
28
S
CANNER
O
PERATION
W
AKE
A
CTIVATION
A
REA
S
ENSITIVITY
(P
HOTOCELL
LED
O
UTPUT
R
ANGE
)
Changing the Wake Area Sensitivity Level (Photocell LED Range Adjust)
The MS2400 Series bar code scanner wake area sensitivity level can be set to the end users preference by scanning one of
the Photocell Sensitivity adjustment bar codes below.
* Maximum Photocell Sensitivity
Medium Photocell Sensitivity
³
2
2
1 2
2
0
Low Photocell Sensitivity
³
2
2
1
2
3
0
Minimum Photocell Sensitivity
*
MS2400 Series Bar Code Scanner Default Setting
This feature enables the MS24xx to be at Max
sensitivity or far sensing for the wake up
photo transistor.
* This is the default setting.
This feature enables the MS24xx to be at a
medium 1 sensitivity or medium sensing for
the wake up photo transistor.
This feature enables the MS24xx to be at a
low sensitivity or low sensing for the wake up
photo transistor.
This feature enables the MS24xx to be at the
lowest sensitivity (close only) for the wake up
photo transistor.