Mio A201 - Manual (Page 14)

6
1.2 Getting Your Device Ready for Use
Performing Initial Startup
Initial startup includes setting the ON/OFF switch, installing the battery, and
completing the setup wizard.
1. Remove the battery cover by pressing the release latch ( ) and then sliding
the cover off. Pull out the stylus and use it to slide the ON/OFF switch to the
ON (left) position ( ).
CAUTION: Always leave the ON/OFF switch in the ON position for normal operation.
2. Install the battery by first inserting the terminal
end of the battery ( ) at an angle and then pushing
down the other end ( ). Replace the battery cover
( ).
3. Your device will automatically turn on. Connect
the AC adapter as described in the next
sub-section.
4. Follow the onscreen instructions to complete the
setup wizard. You will then see the Today screen.