Mercedes-Benz 2005 C 230 Kompressor - Manual (Page 389)

388
Practical hints
Replacing bulbs
Front turn signal lamp bulb
̈ Turn bulb socket 3 counterclockwise
and remove it.
̈ Press gently onto the bulb and turn
counterclockwise out of bulb
socket
3.
̈ Press the new bulb gently into bulb
socket
3 and turn clockwise until it
engages.
̈ Place bulb socket 3 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
̈ Turn housing cover 2 counterclock-
wise and remove it.
̈ Pull out bulb socket 6 with the bulb.
̈ Pull the bulb out of bulb socket 6.
̈ Press the new bulb into bulb socket 6.
̈ Press bulb socket 6 back into the
lamp.
̈ Align housing cover 2 and turn it
clockwise.
Bi-Xenon* headlamps
Warning!
G
Do not remove the cover 1 for the
Bi-Xenon headlamp. Because of high voltage
in Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.