Mercedes-Benz 2005 C 230 Kompressor - Manual (Page 150)

149
Controls in detail
Control system
̈ Move the selection marker with
button
æ or ç to the
Convenience submenu.
̈ Press button j or k repeatedly
until the message Easy-entry feature
appears in the multifunction display.
The selection marker is on the current
setting.
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for
the easy-entry/exit feature:
Setting key-dependency
Use this function to set whether the
memory settings for the seats, the steering
wheel and the mirrors should be stored
separately for each SmartKey
(
୴ page 107).
̈ Move the selection marker with
button
æ or ç to the
Convenience submenu.
̈ Press button j or k repeatedly
until the message Key dependency
appears in the multifunction display.
Warning!
G
You must make sure no one can become
trapped or injured by the moving steering
wheel and driver’s seat when the easy-en-
try/exit feature is activated.
To cancel seat/steering wheel movement,
do one of the following:
ț Press seat adjustment switch*
(
୴ page 38).
ț Move steering column stalk*
(
୴ page 41).
ț Press the memory position switch*
(
୴ page 108).
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
Off The easy-entry/exit
feature is
deactivated
Steer. Column Only the steering
column is moved
St.col.+seat Both the steering
column and the seat
are moved
୴୴