Mercedes-Benz 2005 C 230 Kompressor - Manual (Page 109)

108
Controls in detail
Memory function*
The memory button and memory position
switch are located on the door.
1 Memory button
2 Memory position switch
̈ Switch on the ignition ( ୴ page 33).
or
̈ Open the respective door and insert
the SmartKey in the starter switch.
Storing positions into memory
̈ Adjust the seats, steering wheel and
exterior rear view mirrors to the
desired position (
୴ page 35).
̈ Turn memory position switch 2 to
selected memory position.
̈ Press memory button 1.
̈ Release memory button 1 and press
memory position switch 2 within
three seconds.
All settings are stored at the selected
position.
Recalling positions from memory
̈ Turn memory position switch 2 to
selected memory position.
̈ Press and hold memory position
switch
2 until the seat, steering wheel
and exterior rear view mirrors have
completely moved to the stored
positions.
!
Do not operate the power seats using
the memory button if the seat backrest
is in an excessively reclined position.
Doing so could cause damage to front
or rear seats.
i
Releasing the memory position switch
stops movement to the stored posi-
tions immediately.