Progressive (y, p, Video out, Connection (continued) – Memorex MVDP1101 User Manual

Page 15

PROGRESSIVE (Y, P

, P

) VIDEO OUT:

Use these jacks to connect to a TV with

progressive video input jacks, press the

I/P (Interlace/Progressive) button to

select PROGRESSIVE SCAN. (NOTE: If

you press the I/P button again, the TV

mode setting will change back to

INTERLACE. Also, the Component

Output will change back to TV mode and

you will be able to observe the pictures

on the unit's display screen again.)

Progressive scan is a video scanning

system that displays all lines in a frame in one pass, as opposed to the traditional

system, interlaced scan. This connection provides optimum quality. To ensure

maximum picture quality, use three video-grade cables for connections. Note that it

is essential to match the color-coded connectors with a compatible TV.

525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO

OUTPUT

Compared to standard interlaced video, progressive scan effectively doubles the

amount of video information fed to your TV or monitor. The result is a stable, flicker-

free image. (Check your TV/monitor for compatibility with this feature.)

For the very highest picture quality, try watching a movie on DVD-Video on a

progressive-scan compatible TV.

NOTES:

•

If you connect a TV that is not compatible with a progressive scan signal, press

the I/P button to select Interlace, and set the Component Output to YUV in the

VIDEO SETUP menu. See page 23 to set the Component Output to YUV.

•

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION

TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND

MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF

525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED

THAT THE USER NOT USE PROGRESSIVE SCAN.

CONNECTION (CONTINUED)