beautypg.com

Using an aux send with a plug-in, Send the input signal to the aux bus – MACKIE M2000 User Manual

Page 17

background image

17

User’s Guide

Using an Aux Send with a Plug-in

Click on the associated INPUT menu button and select

an aux input source. In the example below, we have
chosen the Aux 5 Bus.

Send the Input Signal to the Aux Bus

1. Send a signal to a D8B mixer input channel (MIC/LINE

or TAPE IN).

2. Assign the input channel V-Pot/GUI

Control Pot to an aux send. We have
chosen AUX 5 according to the example
above.

3. Use the AUX 5 control to

adjust the input level to the
plug-in.

Remember to select an aux send before using the V-pot or GUI
Control Pot on the mixer input channel (MIC/LINE or TAPE IN).

GUI Control
Pot Assigned
to AUX 5