MACKIE M2000 - Manual (Page 13)

13
User’s Guide
To Load a Preset:
1. Click Memory A or Memory B to choose the
memory location from which to load the file.
2. Click and hold the Menu button.
3. Select Load TC Level I to open a
file. The Load Preset File dialog box
appears.
4. Click INTERNAL if the file is on the internal drive, or
click FLOPPY if the file is on a floppy disk.
5. Select the preset you want to load.
6. Click Open to load the selected preset.
Other Menu Items:
Reset: Loads the previous patch.
Cut: The current settings are temporarily stored in the
clipboard memory in case you want to paste them to a
new preset. The plug-in also reverts to its default
state (it is reset).
Copy: The current settings are temporarily stored in the
clipboard memory in case you want to paste them to a
new preset.
Paste: The current settings are replaced with the setting in
the clipboard memory.