Marantz CDR631 - Manual (Page 16)

10
ENGLISH
RECORDING
- You can adjust the recording balance by pressing the
STORE/MENU (20) button and then pressing REC LEVEL/
SELECT (19). Rotate REC LEVEL/SELECT to adjust the
balance. Press STORE/MENU when finished.
EQUAL BALANCE
: L = 100 , R = 100
ALL LEFT CHANNEL : L = 200 , R = 0
ALL RIGHT CHANNEL : L = 0 , R = 200
5 5 5 5 5 To start recording, press PLAY on the selected source.
➔ The CDR631 automatically starts to record. The record-
ing time left appears on the display.
• If, however, you start the source during a track, CD-
SYNC recording starts at the beginning of the next track
(or track ID) or after 2.7 seconds of silence in analog
recordings.
• To check the elapsed recording time, press TIME (7) or
DISPLAY (71). (This can also be done during recording)
• The recorder stops automatically.
6 6 6 6 6 To stop recording manually, press 9 9 9 9 9 (13, 81).
• If 9 (13, 81) was pressed within 3 seconds after pressing
PLAY on the selected source, no recording will take
place.
• To pause recording, press 2 / ; (14) or ; (76).
To resume recording, press 0 (12) on the CDR631.
After recording, the display will show for sev-
eral seconds as it finishes recording.
Notes:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- MAKE CD is a recording mode that will auto finalize after
synchronized recording. It takes about 1 minute to start auto
finalizing after finish recording the last track. (WAIT appears
on the display.)
- The recorded sound might be distorted when you adjust the
recording level above 0dB for digital recording and -12dB for
analog recording. The default setting of record level for dig-
ital is 0dB and analog is -12dB.
Important:
If you want to play the recorded CD-R disc on any regular
CD player, it must first be finalized. See finalizing discs on
page 12.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
CD-SYNC
The CD-SYNC feature enables you to make fast and easy re-
cordings of a CD, DAT, or MD. Track increments are automati-
cally detected from the source material. Track increments can-
not be added manually. In analog source material, a silence of
2.7 seconds or more is automatically detected as a track incre-
ment. (See page 19 for more detail)
1 1 1 1 1 Make sure the disc is absolutely free of scratches and
dust particles.
2 2 2 2 2 Connect a cable from an external source to the CD-Re-
corder. (see INSTALLATION from page 5 to 7.)
3 3 3 3 3 Press INPUT (10) repeatedly until the selected source,
appears on the display (depending on the digital connec-
tion used):
➔ , or lights up and ,
or appears on the display.
4 4 4 4 4 With the CD-Recorder stopped, press REC MODE (26).
once: to select ‘ ’
twice: to select ‘ ’
four times: to select ‘ ’ (When ANALOG was se-
lected, this option does not appear on the dis-
play.)
➔ and starts to flash.
• If or flashes, the digital data is not being re-
ceived correctly. Check all connections and settings on
both the source unit and the CDR631.
Notes:
- You can adjust the recording level by rotating REC LEVEL/
SELECT (19).
DIGITAL RECORDING : +6dB ~ –63dB
ANALOG RECORDING : 0dB ~ –63dB
CD RECORDER CDR631
POWER
IR
STANDBY
Recordable ReWritable
HEADPHONE LEVEL
0 10
MENU
DELETE
CANCL
TR.INCR. REPEAT RANDOM
ERASE
TEXT 0
5
9 8 7
4 3
6
1 2 TIME
REC MODE
STORE
FINAL
REC LEVEL/SELECT PUSH ENTER
PROG
INPUT
MENU/
STORE CANCEL/ DELETE
0
9 8 7
6 5 4
3 2 1
CD CDR
ABC DEF GHI
JKL MN OPQ
RST UVW XYZ
DISPLAY SPACE SCROLL
FUNCTION
ENTER
er y
y
The numbers between parentheses refer to the fold-out.
CDR631(U)_Eng_P01-11.p65 8/4/00, 9:29 AM 10