Marantz CDR631 - Manual (Page 11)

5
ENGLISH
INSTALLATION
The numbers between parentheses refer to the fold-out.
Unbalanced analog connections
1 For recording and playing, connect the CD-Recorder to
other equipment based on the diagram below:
CD RECORDER CDR631
POWER
IR
STANDBY
Recordable ReWritable
HEADPHONE LEVEL
0 10
MENU DELETE CANCL
TR.INCR. REPEAT RANDOM
ERASE
TEXT 0
5
9 8 7
4 3
6
1 2 TIME
REC MODE STORE FINAL
REC LEVEL/SELECT PUSH ENTER
PROG
INPUT
I N P U T
L
R
O U T P U T
L
R
IN OUT
ANALOG
I N P U T
L
R
O U T P U T
L
R
ANALOG
L
R
ANALOG
4 3
2 Set INPUT SELECT switch (31) to ANALOG L/R (RCA).
0 +22
IN OUT
0 +22
L
(REF=+16dBu/0dBFS)
R -TRIM-
R
INPUT
BALANCED L
L
R
3
COLD(-)
IN
SELECT
Note:
Never connect the CD recorder to the PHONO input on a Pre-
Amp or Receiever.
Digital AES/EBU connections
1 For recording, connect a balanced cable from the CD-
Recorder to a source based on the diagram below:
CD RECORDER CDR631
POWER
IR
STANDBY
Recordable ReWritable
HEADPHONE LEVEL
0 10
MENU DELETE CANCL
TR.INCR. REPEAT RANDOM
ERASE
TEXT 0
5
9 8 7
4 3
6
1 2 TIME
REC MODE STORE FINAL
REC LEVEL/SELECT PUSH ENTER
PROG
INPUT
DIGITAL
OUTPUT
IN
AES/EBU
DIGITAL
5
2 Set AES/EBU SPDIF switch (34) to AES/EBU.
IN
IN OUT
OUT
LOOP
NEUTRIK
(SPDIF)
AES/EBU
SPDIF
Mixer/Pre-Amp,
DAT, CD/R,etc.
Mixer/Pre-Amp,
DAT, CD/R,etc.
Mixer/Pre-Amp,
DAT, CD/R,etc.
This CD-Recorder can be used to record from any digital or
analog audio source, either directly or through a mixer/pre-am-
plifier. In addition, this unit can also be used as a regular CD
player.
For correct connection to other audio equipement, please refer
to the operating instructions for those units.
The following options are available:
- Balanced analog connections
- Unbalanced analog connections
- Digital AES/EBU connections
- Digital SPDIF connections
- Digital Optical connections
- Digital cascade connections
Balanced analog connections
1 For recording, connect an analog balanced cable from
the CD-Recorder to a source based on the diagram be-
low:
CD RECORDER CDR631
POWER
IR
STANDBY
Recordable ReWritable
HEADPHONE LEVEL
0 10
MENU DELETE CANCL
TR.INCR. REPEAT RANDOM
ERASE
TEXT 0
5
9 8 7
4 3
6
1 2 TIME
REC MODE STORE FINAL
REC LEVEL/SELECT PUSH ENTER
PROG
INPUT
ANALOG
R L
R L
BALANCED
IN
BALANCED
OUT
2 1
2 Set INPUT SELECT switch (31) to BALANCED IN.
0 +22
IN OUT
0 +22
L
(REF=+16dBu/0dBFS)
R -TRIM-
R
INPUT
BALANCED L
L
R
3
COLD(-)
IN
SELECT
Note:
- The default (set at factory) input level is +16dBu / 0dBFS. If
you want to change the level, rotate the TRIM control (30) to
adjust input level for both L and R.
0 +22
IN OUT
0 +22
L
(REF=+16dBu/0dBFS)
R -TRIM-
R
INPUT
BALANCED L
L
R
COLD(-)
IN
SELECT
- Make sure that all balanced inpnts do not carry phantom
power. It may damage the unit.
Mixer/Pre-Amp,
DAT, CD/R,etc.
CDR631(U)_Eng_P01-11.p65 8/4/00, 9:29 AM 5