Motion Computing CFT-003 - Manual (Page 5)

5 C5v/F5v Getting Started Model CFT003
Set up wireless
The C5v/F5v comes with built-in Wi-Fi and Bluetooth. Your
tablet PC may also be equipped with mobile broadband for
accessing the Internet. To set up available wireless networks,
follow the steps on this page:
Step 1. Enable wireless from Motion Dashboard
1. From the task bar, tap the Dashboard icon .
2. Tap Wireless .
3. Tap the check boxes next to all wireless networks you intend
to use:
• Enable Bluetooth Internal Wireless
•
Enable 802.11 Internal Wireless
• Enable Mobile Broadband with GPS *
t
ip
If mobile broadband is not listed, your C5v/F5v is
not configured with a mobile broadband module.
Step 2. Set up Wi-Fi
1. From the notification area tap the wireless network icon .
2. Select a wireless network from the list of available networks.
Step 3. Set up Mobile Broadband with GPS (optional)
If you purchased your C5v/F5v with the optional mobile
broadband module, you can connect to high-speed cellular
networks worldwide. With the mobile broadband module and
a data plan from one of several cellular network providers,
you have full Internet access.
N
ote
: Before you can connect to a mobile broadband
network, you must have an active account with a cellular
network provider. Some providers require a SIM card for
mobile broadband access. If you are not sure whether
you need one, contact your mobile broadband provider.
To set up mobile broadband
1. Start the Motion Connection Manager. From the Start menu,
select
All Programs > Motion Computing > MotionCM .
2. Tap the help icon and follow the instructions
provided in the topic Setting up mobile broadband.
If you purchased the optional mobile broadband module,
your tablet PC has GPS capabilities. You can use GPS with
your preferred mapping applications to find your current
and destination locations.
To use GPS
• From the notification area, tap the mobile broadband
icon then tap Start GPS.
Step 4. Set up Bluetooth
The C5v/F5v has a built-in Bluetooth adapter to connect to
other Bluetooth enabled devices.
To add a Bluetooth device
1. From the notification area, tap the Bluetooth icon
and select Add a Device .
2. Make sure the Bluetooth device is discoverable according
to the device manufacturer’s instructions. When a Bluetooth
device is discoverable, it is visible to other Bluetooth devices
within range.
3. Select the desired Bluetooth device from the list of devices.
4. Follow the on-screen instructions.
t
ip
To make the C5v/F5v visible to other devices, tap
the Bluetooth icon then select Open settings. On
the Options tab, select Allow Bluetooth devices to
connect to this computer.