MITSUBISHI ELECTRIC P91DW - Manual (Page 14)

11
PRINTING
7
Printing procedure
2
You can set the number of copies by
pressing the COPY button on the front
panel. You can copy the same picture as
many times as you desire until a new
image data is printed.
2
When the COPY button is pressed during
copy printing, the current image will be
completed and the rest will not be printed.
2
The set number of the copy printing will
not be memorized.
COPY
Indicator
- : number of copies
: continuous printing
COPY printing mode
1 1 1 1 1
Turn on the power.
2 2 2 2 2
Print a picture displayed on the screen.
• Press the
“POWER”
switch to turn
on the power.
• Cut the printed
paper with the
cutter by
tearing off the
paper in the
upper right
direction.
• Print a picture with an application
software. The image data is transferred
through parallel data interface.
3 3 3 3 3
Cut the printed paper.
cutter
Copy printing