Moxa Technologies NPort 5400 - Manual (Page 63)

NPort 5400 Series User’s Manual Configuring NPort Administrator
6-7
ATTENTION
Before modifying NPort 5400’s configuration, use Broadcast Search to locate all NPort 5400s
connected to the LAN, or use Specify by IP Address to locate a particular NPort 5400.
Unlock Password Protection
If the NPort 5400 is password protected (indicated by “Lock” for Status), you will receive the
following error, and you will not be able to use the right click method to open the configuration
page.
In this case, proceed as follows to “Unlock” the device server.
1. Select the NPort 5400 with “Lock” status, click the right mouse button, and then select
Unlock.
2. Input the password and then click on OK.
3. the Administrator will display an “Unlock ok” message.