Miele G 7883 - Manual (Page 34)

For future servicing, please
document any alterations to the
standard factory settings.
General note
Program selector positions that have
not been allocated to a function are
indicated in the middle part of the
display by a bar (
-).
The programming level is called up via
the "Stop"
f position.
Accessing the programming
level
Before performing any of the special
functions that follow, the programming
mode of the labwasher controller needs
to be accessed.
^ Turn the program selector to "Stop"
f.
^ Turn the machine off.
^ Press and hold the "Display" ß and
"Start"
6 buttons. At the same time,
turn the machine on with the "On/Off"
button.
^ The display will show the current
program status "P...".
The "Fill/Drain" indicator will
illuminate.
^ Press 0 twice. "E02" (programming
level 2) appears in the display.
Programming special functions
34