Powering the base station – Motorola MD480 User Manual

Page 16

Text mode
Original mode

Getti

ng Started

Powering the Base Station

Important: Before installing or handling batteries,
please read the Battery Safety Instructions on
page 9.

The base station uses 4 AAA alkaline batteries for
optional backup power (batteries are included with
some models). To install the batteries:
1. With the bottom of the base station facing you,

press the cover latch with a screwdriver to lift and
remove the battery cover.

2. Insert 4 AAA alkaline batteries into the battery

compartment.

3. To replace the cover, insert the tabs of the cover

into the slots and press down until the cover clicks
into place.

4. Plug the power cord into the back of the base

station and into an outlet.

1043B05o.book Page 14 Thursday, April 10, 2003 3:18 PM