Mr. Coffee ECMP10 - Manual (Page 2)

MR. Model ECMP1O
Thank you for purchasing a MR. COFFEE Espresso and Cappuccino Maker.
NOTICE: PLEASE READ THE FOLLOWING
CHANGES TO THE INSTRUCTION MANUAL
Page 4 - DIAGRAM OF PARTS
N - Heating Indicator Light (Orange)
Page 6 - BREWING ESPRESSO
6 .
8 .
11.
The Heating Indicator Light will be illuminated when the machine is heating water
for brewing and steaming.
Use the Measuring Spoon to measure out grounds into the filter. Fill either the
1 cup or 2 cup filter to the top with espresso grounds. Use the tamping tool to
gently tamp down the grounds so that they are flattened down and smoothed over.
Grounds should be slightly below the top of the filter cup. Gently remove any
excess grounds from the rim of the filter holder.
When the Heating Indicator Light goes out, you may begin brewing espresso.
(Your machine will only take a few minutes to heat up enough water for brewing).
Turn the Control Dial to the right (brewposition). Brew for approximately
30 seconds. You may adjust brewing time to taste. A shorter brew time will yield
a stronger cup of espresso. The Heating Indicator Light may come back on while
you are still brewing. This just means that the machine is heating more water.
12a. When the Control Dial is turned back to the “0” position, excess water may drip
into the Drip Tray. Water accumulation in Drip Tray is normal and should be
emptied and cleaned after each use to avoid overflow.