Miele H 395 BP - Manual (Page 65)

A tone will sound when the "SELF
CLEAN" function has ended and
"Ready" will appear in the display.
^ Once the oven has cooled, remove
the ash with a damp sponge.
A film may build up on the oven door.
This can be removed with a shielded
blade scraper or a non-abrasive
sponge and a mild solution of warm
water and dish soap.
The "SELF CLEAN" function will stop,
- if the oven interior is extremely
soiled. (Remove large pieces of
debris and restart the function.)
- if the "Clear" control is touched.
- if the oven is shut off.
- if there is a power failure.
The display will show "Process
interrupted".
The oven door will remain locked
until the oven temperature has fallen
below 535°F (280°C).
You can set the "SELF CLEAN" function
for both ovens at the same time.
However, the cleaning process will run
one after another. This means the oven
which was programmed first, will be
cleaned first.
The status of the cleaning process is
shown in the display.
Self Cleaning
65