Motorola Cordless Telephone - Manual (Page 30)

29
T
roubleshooting
The signal is weak or
has noise or static • Check the battery and power.
• Move closer to the base.
• Move the base to a different power outlet (especially if
the phone is sharing an outlet with an appliance).
• Press R until you get on a clear channel.
You hear other calls on
your line • Hang up. Place the phone in the base. Wait 30
seconds, then try again.
• Disconnect the base from power and phone.
• Press
R until you get on a clear channel.
The battery won’t
charge • Check the base. Is it properly connected? Are its
contacts clean and dry?
• Check the battery contacts. Make sure the battery is
connected properly.
• Is it an old battery? Replace the battery.
The battery loses
charge faster than
normal • Is it a new battery? A new battery needs to be charged
at least 12 hours before use.
• Is it an old battery? Replace the battery.