Moffat TURBOFAN E31D4 - Manual (Page 12)

Operation
10
Setting the Oven Programs
Oven can be pre-programmed with up to 20 Program’s. When you receive your oven, the controller is not programmed. To
set programs, carry out the following for each program required:-
1.
ENTER PROGRAMMING MODE.
Press ‘Programs’ button to enter
‘Programming’ mode.
2.
SELECT PROGRAM REQUIRED .
Rotate ‘Temperature Control’ to program
required.
Temperature Display will show program
selected.
Press and hold ‘Temperature’ button
until ‘Time’ and ‘Temperature’ displays
and ‘Temperature’ button LED flashes.
Change time and temperature
parameters.
3.
ENTER COOK TEMPERATURE .
Rotate ‘Temperature Control’ to set
cook temperature.
+ to increase the temperature.
- to decrease the temperature.
‘Temperature’ Display will show
temperature selected.
4.
ENTER COOK TIME .
Rotate ‘Timer Control’ to set cook time.
+ to increase the time.
- to decrease the time.
‘Time’ Display will show time
selected.
‘Time’ and ‘Temperature’ displays
and ‘Temperature’ button LED flash.
Press ‘Temperature’ button to con-
firm ‘Time’ and ‘Temperature’ set-
tings.
Heating ‘On’
Indicator
Timer ‘On’
Indicator