Mr. Coffee SRX20 - Manual (Page 6)

Important, Please Read Before First Use
. THE CLOCK ON THIS MODEL MUST BE SET FIRST,
BEFORE THE COFFEEMAKER WILL OPERATE.
Please refer to setting the clock instructions, below.
. THE SPECIAL PAUSE ‘N SERVE DECANTER LID MUST BE
PROPERLY IN PLACE ON THE DECANTER AT ALL TIMES.
This lid opens and closes the drip-stop valve on the bottom
of the brewing funnel. If this lid is not in place on the decanter
when brewing coffee, coffee will build up in the brewing funnel
and begin to overflow onto the warming plate.
. AUTOMATIC PAUSE ‘N SERVE ALLOWS YOU TO REMOVE
THE DECANTER FOR NO LONGER THAN ONE MINUTE
to sneak a cup while the coffee is still brewing. If the decanter
is removed for more than one minute, the brewing funnel
will overflow.
Be sure any replacement decanter you purchase is a Mr.
Coffee decanter with the Pause ‘n Serve lid.
Setting the Clock and Timer
AUTO OFF LIGHT
indicates machine shut
PM INDICATOR itself off or Auto brew
HOUR SET
needs to be reset
advances clock BREW SET
by the hour sets time to brew
SIGNAL LIGHT MINUTE SET
indicates when advances clock
coffeemaker is on
3
by the minute
CONTROL SWITCH
ON OFF - AUTOMATIC
TO SET CLOCK...
1. Move the CONTROL SWITCH to OFF.
2. Plug the power cord into your electrical outlet. The display
on the clock will flash until you set the time.
3. Alternately press and hold the HOUR and MINUTE buttons until
you reach the current time. A red dot will appear in the upper
left display corner for PM time.
TO PRESET THE BREWING TIME...
Simply press and hold the BREW SET button while setting the
brew time with the HOUR and MINUTE buttons. Please pay
attention to PM INDICATOR light.
5