Setup – Marantz SR5003 User Manual

Page 27

ENGLISH

BASIC

CONNECTIONS

BASIC OPERA

TION

ADV

ANCED

CONNECTIONS

SETUP

ADV

ANCED

OPERA

TION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

SETUP

After all components are connected, initial setup
must be performed.

ONSCREEN DISPLAY MENU SYSTEM

This unit incorporates an onscreen menu system,
which makes various operations possible by using
the cursor (

3, 4, 1 , 2) and ENTER buttons on the

remote controller or on the front panel.

Note:

• To view the onscreen displays, make certain you

have connected the MONITOR OUT jack on the rear
panel to the composite, S-Video, component video
or HDMI input of your TV or projector. (See page
13, 14)

Press

the

AMP button on the remote controller.

(This step is not needed when operating the
setup menus from the unit.)

Press

the

MENU button on the remote controller

or press the MENU button on the front panel.
The “MAIN MENU” of the OSD menu system is
displayed.

There are 6 items in the MAIN MENU.

Select the desired sub-menu with the

3 or 4

cursor buttons and press the ENTER button.
The display will change to the selected sub-
menu.

Notes:

• If you desire to adjust any sub-menu, you need to set

it to UNLOCKED.

• To lock sub-menus, set items 1-6 on the MAIN

MENU to “LOCKED”.

(1) Move the cursor to “1. INPUT SETUP” in the

MAIN MENU.

(2) Select the “

0” mark left of “LOCKED” with the 1

2 cursor buttons.

To exit from OSD menu system, press the

EXITbutton, or move the cursor to EXIT and
press the ENTER button.

SR5003 FRONT BUTTON CONTROL

RC004SR BUTTON CONTROL

UP button

RIGHT button

DOWN button

MENU button

Press this button to display the OSD

menu system.

EXIT button

Press this button to exit the OSD menu system.

LEFT button

ENTER button