Motorola QIP27xx - Manual (Page 28)

22
Connecting an A/V Receiver, TV, and VCR
If your equipment supports it:
•
The optical (square
SPDIF
connector) or coaxial (round
SPDIF
connector) audio outputs may be used in place of the stereo audio
outputs (
AUDIO R and L). In most cases, these outputs offer a higher
level of audio quality, including support for Dolby Digital 5:1
surround sound.
•
S-video connections may be used in place of the standard RCA
video connections. In most cases, S-video offers a higher level of
standard definition video quality than RCA video.
1 Connect an RF coaxial cable to the service provider’s wall outlet
and to the
CABLE IN
connector on the set-top.
2 Connect a stereo audio cable to the
AUDIO OUT R
and
L
connectors
on the set-top and to the
INPUT R
and
L
connectors on the
A/V receiver.
3 Connect a video cable to the
VIDEO OUT
connector on the set-top
and to the CABLE / TV VIDEO connector on the A/V receiver.
4 Connect a stereo audio cable to the
VCR AUDIO OUT R
and
L
connectors on the A/V receiver and to the INPUT AUDIO R and L
connectors on the stereo VCR.
5 Connect a stereo audio cable to the OUTPUT AUDIO OUT R and L
connectors on the stereo VCR and to the VCR AUDIO IN R and L
connectors on the A/V receiver.
6 Connect a video cable to the INPUT VIDEO connector on the stereo
VCR and to the
VIDEO VCR OUT
connector on the A/V receiver.
7 Connect a video cable to the OUTPUT VIDEO connector on the stereo
VCR and to the
VIDEO VCR IN
connector on the A/V receiver.
8 Connect a video cable to the INPUT VIDEO connector on the stereo
TV and to the
TV
/
MONITOR OUTPUT VIDEO
connector on the A/V
receiver.