Motorola QIP27xx - Manual (Page 12)

6
OPERATION
Turning Power On and Off
Press
POWER
on the front panel to turn the set-top on or off. When using
the remote control, be sure you press CABLE before pressing POWER .
Changing Channels
You can change channels in two ways:
• Press
CHANNEL
S or T on the front panel of the set-top, or
press CHANNEL
+ or – on the remote control to step through the
channel selection.
•
Enter the number of the channel you wish to view using the number
keys on the remote control.
Adjusting the Volume
Press
VOLUME
+ or – on the remote control to adjust the volume. When
you adjust the volume, the volume scale is displayed on the screen.
Press
MUTE on the remote control to turn the sound off and on again.
For best audio quality, use the remote control to set the set-top to
approximately ¾ of the maximum volume level, and then adjust the audio
levels on external devices, such as your TV or A/V Receiver.
Electronic Program Guide
The Electronic Program Guide (EPG) displays information about TV
programs and enables you to access features such as Parental Control
or Pay-Per-View. EPGs can vary in look and feel, depending on your
service provider. Refer to the EPG manual supplied by your service
provider for detailed instructions.