Marantz SR4001 - Manual (Page 8)

4
ENGLISH
t INFRARED receiving sensor
window
This window receives infrared signals for the remote
control.
y SURROUND MODE button
You can select the surround mode by pressing this
button.
u PURE DIRECT button and
indicator
When this button is pressed once, “ SOURCE DIRECT ”
appears on the FL display. If pressed again, “ PURE
DIRECT ” appears. After 2 seconds, the FL display
indication goes out.
In the source/pure direct mode, the tone control
circuitry and bass management are bypassed.
Notes:
• The surround mode is automatically switched to
AUTO when the pure direct function is turned on.
• Additionally, speaker configurations are fixed
automatically as follows.
Front SPKR = LARGE
Center SPKR = LARGE
Surround SPKR = LARGE
Surround Back SPKR = LARGE
Sub woofer = YES
i SIMPLE SETUP button
Press this button to enter the simple setup mode.
You can setup the speaker conditions (speaker
sizes, number of speakers, speaker delay times)
quickly by pressing the cursor buttons.
o DISPLAY button
When this button is pressed, the FL display mode
is changed as Surround Mode
→ Auto-display Off
→ Display Off → Input Function and the display off
indicator( DISP ) lights up in condition of DISPLAY
OFF.
!0 MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 38)
!1 CLEAR button
Press this button to cancel the station-memory
setting mode or preset scan tuning. (See page 38)
q POWER switch and STANDBY
indicator
Press the button to turn the power ON, and press
again to turn it OFF. If the
POWER switch is in the
ON position, the power of this unit can be turned ON/
OFF by pressing the
POWER button on the remote
control unit.
When this unit is in the standby mode with the
POWER switch set to the ON position, pressing the
ENTER button also allows to turn the power on.
The STANDBY indicator lights up when this unit
is the standby mode (power OFF) by the remote
control unit.
w MULTI (Multi Room) button
(SR5001 only)
Press this button to activate the Multiroom system.
“
MULTI ” indicator will be illuminated in the display.
w 7.1CH INPUT button (SR4001 only)
Press this button to select the output of an external
multichannel player.
e INPUT SELECTOR knob
(AUDIO/ VIDEO)
This knob is used to select the input sources.
The video SOURCE, such as TV, DVD, VCR1 and
DSS, selects video and audio simultaneously.
Audio function sources such as CD, TAPE, CDR/MD,
and TUNER may be selected in conjunction with a
Video source.
This feature (Sound Injection) combines a sound
from one source with a picture from another.
Choose the video source fi rst, and then choose a
different audio source to activate this function.
r M.(Multi Room) SPEAKER button
(SR5001 only)
Press this button to activate the Multiroom Speaker
system. “
MULTI ” indicator will be illuminated in the
display. (See page 40)
r S.(Surround) SPEAKER B button
(SR4001 only)
Press this button to activate the Surround Speaker B
system . “
SPKR B ” indicator will be illuminated in the
display. (See page 41)
FRONT PANEL
SR4001
S.SPEAKER B
DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO
SETUP SIMPLE
7.1 CH INPUT
PURE
T-MODE
SURROUND MEMORY DISPLAY ATT MUTE
STANDBY
PHONES POWER ON/OFF
INPUT SELECTOR VOLUME
UP DOWN
AV SURROUND RECEIVER SR4001
DIRECT
AUTO HT-EQ EXIT MENU
MODE
BAND
CLEAR
ENTER
!5 !6 !7 !8 @3 !9 @0 @1 @2
q w y u !3 i o !0 t !2 !1 r e
!4
SR5001
DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO
SETUP SIMPLE PURE
T-MODE
SURROUND MEMORY DISPLAY ATT MUTE
STANDBY
PHONES POWER ON/OFF
INPUT SELECTOR VOLUME
UP DOWN
AV SURROUND RECEIVER SR5001
DIRECT
AUTO HT-EQ EXIT MENU
MODE
BAND
CLEAR
ENTER
MULTI SPEAKER MULTI
!5 !6 !7 !8 @3 !9 @0 @1 @2
q w y u !3 i o !0 t !2 !1 r e
!4