Metz 30 LCD-TV PIP - Manual (Page 12)

12
4. Day-to-day operation
Switching on
Switch on the TV set with the mains switch. It is
now in the standby state and the red standby indi-
cator lights. Select any desired programme posi-
tion with the numeric keys on the remote control.
Alternatively, you can switch on the TV set by
pressing the
key. In this case, the programme
you were watching when the TV set was switched
off is again selected.
Switching off
Press the on the remote control to switch the set
to the standby state or switch the set off completely
with the mains switch.
Programme selection
You can select the programme positions with the
numeric keys, by stepping through the positions
with the "P+" and "P-" keys or by selecting a pro-
gramme from the station table.
Open the station table by pressing the "INFO"
key, use the cursor key
̇ ̈ ̆ ̄ to select the des-
ired station and press the "INFO" key to close the
station table.
Adjusting the volume
The volume can be adjusted with the – + key.
INFO
OK
Ǽ
P+
P–