beautypg.com

Specific safety rules, Save these instructions – Makita BJS130 User Manual

Page 3

background image

3

Power tool use and care

16. Do not force the power tool. Use the correct

power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.

17. Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.

18. Disconnect the plug from the power source

and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools.
Such
preventive safety measures reduce the risk of
starting the power tool accidentally.

19. Store idle power tools out of the reach of

children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are
dangerous in the hands of untrained users.

20. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use.
Many accidents
are caused by poorly maintained power tools.

21. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.

22. Use the power tool, accessories and tool bits

etc. in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed.
Use
of the power tool for operations different from
those intended could result in a hazardous
situation.

Battery tool use and care

23. Ensure the switch is in the off position before

inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites
accidents.

24. Recharge only with the charger specified by

the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.

25. Use power tools only with specifically

designated battery packs. Use of any other
battery packs may create a risk of injury and fire.

26. When battery pack is not in use, keep it away

from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery
terminals together may cause burns or a fire.

27. Under abusive conditions, liquid may be

ejected from the battery, avoid contact. If
contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help.
Liquid ejected from the battery may cause
irritation or burns.

SERVICE

28. Have your power tool serviced by a qualified

repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.

29. Follow instruction for lubricating and

changing accessories.

30. Keep handles dry, clean and free from oil and

grease.

GEB032-1

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to cement shear safety rules. If you use this power
tool unsafely or incorrectly, you can suffer serious
personal injury.

1.

Hold the tool firmly.

2.

Secure the workpiece firmly.

3.

Keep hands away from moving parts.

4.

Edges and chips of the workpiece are sharp.
Wear gloves. It is also recommended that you
put on thickly bottomed shoes to prevent
injury.

5.

Do not put the tool on the chips of the
workpiece. Otherwise it can cause damage
and trouble on the tool.

6.

Do not leave the tool running. Operate the tool
only when hand-held.

7.

Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.

8.

Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.

9.

Avoid cutting electrical wires. It can cause
serious accident by electric shock.

10. Some material contains chemicals which may

be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.

11. Always use the correct dust mask/respirator

for the material and application you are
working with.

SAVE THESE INSTRUCTIONS.