Making a private call, Making a selective call, Making a private call making a selective call – Motorola XPR 7350 User Manual
Page 29: See making a private call, Receiving and making calls
Receiving and Making Calls
English
19
Making a Private Call
While you can receive and/or respond to a Private Call initiated
by an authorized individual radio, your radio
must be programmed for you to initiate a Private Call.
There are two types of Private Calls. The first type, where a
radio presence check is performed prior to setting up the call,
while the other sets up the call immediately.
Only one of these call types can be programmed to your radio
by your dealer.
You hear a negative indicator tone, when you make a Private
Call via the One Touch Access button or the Channel
Selector Knob, if this feature is not enabled.
Use the Quick Text Message or Call Alert features to contact an
individual radio. See Text Messaging Features on page 30 or
Call Alert Operation on page 26 for more information.
Procedure:
1
Select the channel with the active group alias or ID. See
Selecting a Channel on page 14.
OR
Press the programmed One Touch Access button.
2
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3
Press the PTT button to make the call. The LED lights up
solid green.
4
Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
5
Release the PTT button to listen. When the target radio
responds, the LED blinks green.
6
If the Channel Free Indication feature is enabled, you hear a
short alert tone the moment the target radio releases the
PTT button, indicating the channel is free for you to respond.
Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
7
You hear a short tone.
Making a Selective Call
Just like a Private Call, while you can receive and/or respond to
a Selective Call initiated by an authorized individual radio, your
radio must be programmed for you to initiate a Selective Call.
Procedure:
1
Select the channel with the active group alias or ID. See
Selecting a Channel on page 14.
2
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
3
Press the PTT button to make the call. The LED lights up
solid green.