Motorola CLS1110 - Manual (Page 32)

Pr
ogramming Mode
30
Programming Call Tones and VibraCall ® (CLS1410 only)
Your radio can transmit call tones to other radios in your group so you can alert them
that you are about to talk. Your radio is programmed at the factory with call tones
turned off (set to
0 ), but you can change this setting to choose a distinctive call tone.
The VibraCall ® feature is an additional call tone option that makes the CLS1410 radio
vibrate briefly when it receives if you have not transmitted or received in the last
30 seconds. Select call tone 4 to turn VibraCall
®
on. i displays on the radio when
VibraCall ® is on.
1. In programming mode, press S until E displays.
2. Press [ or ] to hear and select the call tone. Select call tone 4
for VibraCall
®
(CLS1410 only).
3. Press and hold Push to Talk to exit programming mode, or press
S
to continue programming.
To transmit your call tone, press
B
on the side of the radio.
6864110w15o.book Page 30 Wednesday, March 19, 2003 6:17 PM