MITSUBISHI ELECTRIC XD250U-ST - Manual (Page 31)

EN-31
E
N
G
L
IS
H
Advanced features (continued)
To cancel the password function:
1. Display the FEATURE menu.
2. Press the S or T button to select PASSWORD FUNCTION.
3. Press the ENTER button.
•
The screen for canceling the password function appears.
4. Press the ENTER button.
•
The screen for entering the password appears.
5. Enter a 4 - 8 digit password using the S, T, W or X buttons on
the remote control as shown below.
(S=1, X=2, T=3, W=4)
6. Press the ENTER button.
•
If you enter a wrong password, an error message appears.
• To cancel the procedure, press the MENU button.
Important:
• When the screen for entering the password is displayed, to disable
the password function, hold down the SOURCE and POWER but-
tons on the control panel together for about three seconds.
Magnify
By pressing the MAGNIFY button on the remote control, you can mag-
nify the image to view the details.
• The MAGNIFY mode doesn't function with some input signals. For
details, see page 41.
• The MAGNIFY mode doesn't work with video or S-video signal.
MAGNIFY
To use the MAGNIFY mode:
1. Press the MAGNIFY button.
•
You can select the area to be magnified by pressing the S,
T, W or X button on the remote control.
• You can change the magnification of the selected area by
pressing the VOLUME S or T button.
2. Press the MAGNIFY button again to exit the MAGNIFY mode.
•
The regular operation screen will appear.
Important:
• In the MAGNIFY mode, you can't adjust the volume.
FEATURE
MENU ACCESS
LOCK OK
opt.
UNLOCK OK
PASSWORD
1
3
2 4 O K : ENTER CANCEL : MENU
Magnified image