Morphy Richards Orb vacuum cleaner - Manual (Page 6)

Cleaning the motor
protection filter
The micro-filters must be cleaned everytime
the dust container is emptied to remove the
fine dust particles collected. This can be done
by shaking them.
The motor protection filter ‰ is in the dust
container compartment. With the dust
container removed, lift out the filter holder,
remove the filter and shake to clean
G
.
The exhaust filter · is located at the back
the cleaner. To remove, press down the catch
and pull the cover away to remove the holder
H . Remove the filter from the holder and
shake to clean. The filter can be washed in
warm water but do not use detergent. Allow to
dry naturally and ensure it is totally dry before
replacing it.
IMPORTANT: Do not operate without micro
filters fitted.
Storage position
When finished, you can store accessories
by locating the tube storage clip into the slot
on the underside of the cleaner as shown
I
.
I
G
H
‰
·