beautypg.com

Basic operation – Motorola H01UCC6DU3AN User Manual

Page 20

background image

Basic Operation

19

Basic Operation

4

Turning the Radio On

1. Turn the on/off/volume control clockwise until it clicks. You

will hear a chirp tone after a successful power-up.

NOTE: Each time it is turned on, the radio per-

forms a self check to validate correct
operation. If the radio is not operating
at the exact parameters set in the facto-
ry or field, you will hear a 5-second
warning tone instead of the normal
chirp tone. This indicates the radio
should be serviced immediately.

2. The unit automatically operates dependant on current switch

settings. Set the volume by turning the on/off/volume control
clockwise. One half turn equals about 50% output.

Receiving

Trunked Modes and Conventional Channels

1. Turn the radio on and select the desired mode and group for

trunking, or desired mode and channel for conventional.

2. Listen until you hear a transmission, then adjust the volume

control for a comfortable listening level.

3. Your radio is now set to receive calls on the selected mode.

NOTE: If the mode selector knob and the 3-

position toggle switch are both placed
on an unprogrammed position (blank
position), you will hear an “invalid

MAEPF-22063-A

On/Off

Volume Control

Basic Operation