MITSUBISHI ELECTRIC 3D DLP HOME-CINEMA TELEVISION SERIES 742 - Manual (Page 10)

10 1. Additional TV Features
For assistance call 1(800) 332-2119
More On TV Inputs and Outputs, continued
2. USB
• Use for a wireless network adapter to receive
StreamTV Internet content.
• Use this port when updating the TV software using
a USB memory device.
• The USB port can also serve as a standard USB
5-volt, 500-milliamp power output to power an
accessory device.
3. USB-P (Power Only)
842 Series. Standard USB 5-volt, 500-milliamp power
output you can use to supply power to an accessory
device. See page 14.
4. LAN
Use the LAN Ethernet jack for streaming Internet video
to the TV.
5. ANT (Antenna)
Connect your main antenna or direct cable service
(without a cable box) to
ANT. The ANT input can receive
digital and analog over-the-air channels from a VHF/
UHF antenna or non-scrambled digital/analog cable
source.
6. 3D GLASSES EMITTER
Use this jack for the special synchronization emitter sup-
plied with some 3D glasses. The emitter sends out an
infrared signal that synchronizes your 3D glasses with the
screen display.
7. DVI/PC AUDIO INPUT
Connect a DVI device to one of the TV’s HDMI inputs
and use this jack to send analog audio to the TV.
8. L/R (INPUT 1 audio)
Analog stereo inputs for use in conjunction with adja-
cent composite or component video jacks.
9. Y Pb Pr (Component Video)
Analog video inputs able to accept high-definition video
from a high-definition source device. Use the adja-
cent
R and L inputs if you wish to send audio to the TV
speakers.
10. Y (Composite Video)
Analog standard-definition video inputs. Use the adja-
cent
R and L inputs if you wish to send audio to the TV
speakers.
11. DIGITAL AUDIO OUTPUT
This output sends Dolby Digital or PCM digital audio
to your digital A/V surround sound receiver. Incom-
ing analog audio is converted by the TV to PCM digital
audio. If you have a digital A/V receiver, this is the only
audio connection needed between the TV and your A/V
receiver.
12. AUDIO/SURROUND OUTPUT, L/R
842 Series. Provides analog audio output of the
current program. Use to:
• Send audio to an analog A/V surround sound
receiver or stereo system.
• Send a rear surround sound channel to an external
amplifier or self-powered speakers. See page 15.
• Send audio to headphones. Set Sound > Global >
Analog Audio Out to Variable.
Digital audio from digital channels and HDMI devices is
converted to analog audio by the TV for output on these
jacks.
13. CENTER INPUT
842 Series. Connect your A/V receiver’s center
channel output to this input to have the TV speak-
ers complement your external sound system with
center-channel sound. Set
Sound > Global > Center
Channel to On to enable this input. See “Using the TV
Speakers as a Center Channel,” page 16.
14. SUBWOOFER OUTPUT
842 Series. Connect a powered subwoofer to this
input to complement effects from the TV’s speakers.
Set
Sound > Global > Subwoofer to On to enable this
output (see “Adding a Subwoofer,” page 14).