MITSUBISHI ELECTRIC DV300 - Manual (Page 27)

DV300/DV301B 30" Multimedia Information Display
OSD Warning Messages
A warning message may appear on the screen indicating the LCD Monitor current status.
When user sees this warning message, it means that the
LCD Monitor is in adjustment process.
A warning message may appear on the screen indicating
that the LCD Monitor is out of sync range.
See Specifications for the Horizontal and Vertical
frequency ranges addressable by this the LCD Monitor.
Recommended mode is 1280x 768 @ 60Hz.
This message means that there is no video input signal.
The LCD Monitor is in a power saving mode
(in PC mode).
The main OSD menu is unlocked.
The main OSD menu is locked.
52
Symptoms Having this problem? Check these items
Cont. • Make sure you did not plug the video cable to video
output port behind the LCD monitor TV.
Low Quality Picture not crisp and • Check DVD connection
DVD connection some colour distortion • Composite gives good picture
• S-Video gives better picture
• Component gives best picture
No sound See video but no audio • Check if the LCD Monitor volume is turned off or muted.
• Connect the audio cable securely.
• Audio cable is connected incorrectly.
• Verify that the audio source is selected correctly in the
OSD.
Remote Control
Problems
Remote control does No response from the • Point the remote control directly at the remote sensor on
not work properly LCD Monitor TV the LCD Monitor.
when remote is pressed • Replace both batteries with new ones.
• Make sure the remote control is not disabled
(for disable/enable the remote control, please refer to the
section of Remote Control).
Product Specific
Problems
Screen image is too small Image is centred • Perform the LCD Monitor factory reset (via Menu
on screen, but does -> Factory Reset -> All Settings).
not fill entire viewing area
Cannot adjust the LCD OSD does not appear on • Turn the LCD Monitor off and unplug the power cord and
Monitor with the buttons the screen then plug back and power on
at the side of the unit .
For further assistance, refer to the Service Contacts list and contact your local Diamond Digital distributor.
51